What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 02.07.2025 00:35
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
(Dc diagram shown, AC is similar).
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Presidential Message on National Men’s Health Week, 2025 - The White House (.gov)
2024–10–16 [ OO OLAOYE OYEBODE ]
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
the problem then depends on "how fast does the fuse operate?".
N.J. resident traps rabid raccoon, officials say - NJ.com
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
He then describes the function of a fuse.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Russell's F1 Canadian GP win in doubt after Red Bull protest - Autosport
It also is a device that limits the change in current flow.
[old diagram got deleted by accident]
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Why is my elder sister so mean?
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
eight
At least they know the answer if they wanted it.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
This one hit behind the barn.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
It seems Mohan does not understand the difference between a comment and an Answer.
Best Pokémon to Vote for in August 2025 Community Day (PvP Analysis) - Pokémon GO Hub
but I think this circuit , shows a few more pieces.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Why do some mothers hate their daughters especially when they're the eldest?
The MOV will conduct when the voltage exceeds 50% of line voltage.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
He then asserts :
What are the ways in which the human body adapts to different climates and heat?
a photo is worth a thousand words.
Barnstars:
The third is lightning and “how it gets conducted into a home.”
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
One is “what exactly is in a ‘surge protector’ ? ”
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
An AC voltage/ current source, and an ac inductive load.
This is 'the assistant's answer'
Because the load is inductive, the current lags the voltage.(by a bit).
Now when you have a certain ac resistance, then a current flows in a loop.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Can the fuse protect the electronic devices from lightning instead of a surge protector.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
This is where the MOV conducts again, and dissipated the energy.
I post the exact comment here.
In schematic diagrams this is the symbol for a fuse:
First Sentence:
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
A circuit breaker is similar, but is resettable.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
[image of Common-mode choke]
nine
so, what happens?
2024–10–14 [Omar Gharbi Omar Gharbi ]
He then describes Rainy Season and Lightning.
So, the voltage could go up to 500 volts, and the fuse will not open up.
What does a fuse do?
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Here is a simplified AC power diagram.
A fuse is a non-resetable over current circuit protector.
Upvotes:
There are three different concepts here that are getting confused.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
There are two important concepts here.
Edit 2024–10.
This device then solves the entire problem.
One
At one ohm, the resistor has a maximum of 1 watt power.
what exactly is a ‘surge’ protector?
These devices are installed between the “hot” and “neutral” and protective ground.
This is where this question deviates from being a 'generic' question, and becomes more specific.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
2024–10–10[John johnson John Johnson ]
What is lightning?
But it can get overloaded, and no longer works.
The bolt then partially travels down the line to your home.
But… the neutral is now “floating” because of the 1 ohm resistance.
The other is “what does a “fuse” do?”
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
For this case there are devices called Metal oxide varistors (MOV).
These are simplified answers to the original question, and does not change anything I wrote above.
but this device (an Inductor) … impedes the rapid changes in the current.